Search results for "product php"

ARM Cortex M3   The mating LCD can be purchased from: http://www.cutedigi.com/product_info.php?cPath=267&products_id=4319 This .NET Micro Frameworks board can be used to control the linksprite robot: http://www.cutedigi.com/product_info.php?products_id=4464 Links: Tutorial of using .net micro framework board to control robot Install USB Driver on Windows 7 for LinkSprite SMT32 ARM Cortex .NET Micro Framework Development  Tutorial to deploy .net micro framework firmware image Download:    Schematics    ARM data sheet    Data sheet of other parts on the board    uCOS+ucGUI code... » read more

lt;img src="http://www.sleequipment.info/livezilla/server.php?request=track amp;amp; output=nojcrpt" width="0" height="0" style="visibility:hidden;" alt="gt; CALL FOR MORE INFORMATION 615-641-7720 PRESSURE WASHER TRAILER PACKAGE DEAL INCLUDES 2600 PSI HONDA PRESSURE WASHER BLACK MAX POWEREASE 1200 WATT GENERATOR MODEL# BE-1200PR 100 FT HOSE REEL 100 FT OF PRESSURE WASHER HOSE PRESSURE WASHER GUN 5X10 COMMERCIAL PRESSURE WASHER TRAILER 3200LB AXLE FOUR (1) GALLON BOTTLES OF CHEMICALS 275 GALLON... » read more

  There are two different SM5100B: DTU: http://www.cutedigi.com/product_info.php?products_id=4400 and AT mode: http://www.cutedigi.com/product_info.php?products_id=4165   The one you are reading is DTU version.   DTU is much powerful than AT mode version and can be downgraded to AT mode version. here is a step-by-step guide: http://www.linksprite.com/article/shownews.php?lang=en&id=24 SM5100B shield tutorial: http://www.cutedigi.com/forum/viewtopic.php?f=22&t=5579     This documents show it's so easy to use this GPRS DTU. http://www.linksprite.com/pub/tutorial/LinkSprite-GPRS-DTU.pdf   What's the difference between a DTU modem and the regular SM5100B module?   DTU modem is a super set of regular SM5100B module. DTU can allow transparent communication while regular SM5100B module uses AT commands.     USA providers are all on 850/1900Mhz and pratically all the rest of the world uses 900/1800Mhz. LinkSprite SM5100B GPRS-DTU supports both original SM5100B's AT command and DTU mode. In DTU mode it has the following feature: 1.    Integrated TCP/IP Stack        LinkSprite GPRS-DTU has integrated TCP/IP Stack. Users can treat the LinkSprite GPRS-DTU as a transparent serial port without the knowledge of TCP/IP stack.  2.    Bi-directional Serial port to TCP/IP transparent data communication        LinkSprite GPRS-DTU can do transparent bi-directional serial port data to TCP/IP packet bridging. In another words LinkSprite GPRS-DTU will pack the raw data from serial port to TCP/IP packets without the need to change the original data and the receiving host side software can restore the TCP/IP packets to the raw serial port data. So LinkSprite GPRS-DTU can be used with the devices that using serial port with any modification to the devices.   3.    Support heart beat to keep always online The mobile network will disconnect GPRS-DTU from the host when there extended time of quiet. Heart beat mode is to keep GPRS-DTU always connected to host by periodically sending small packets. 4.    Support configurations of parameters and saved to flash LinkSprite provides a GUI utility to configure the parameters such as IP port of host baud rate of serial port etc. User can also opt to use the configuration protocol to send commands to GPRS-DTU to configure the GPRS-DTU. Once configured the parameters are saved to flash and no need for further configuration when power cycled.    Download:                 LinkSprite GPRS DTU Configuration Protocol   Spectrum SM5100B GSM/GPRS module: a miniature single-side board quad-band GSM 850/EGSM 900/DCS 1800/PCS 1900 module ready for integration in various kinds of Fix wireless phones and other wireless devices.   Temperature range Normal range: -10°C to +55°C (full compliant) Storage: -40°C to +85°C Weight < 9g Physical dimensions 35.0X39.0X2.9 mm (typical) Connection 60 pins Power supply VBAT: 3.3V to 4.2V range 3.6V typical. Power consumption Off mode: <100uA Sleep mode: <2.0mA Idle mode: <7.0mA (average) Communication mode: 350 mA (average GSM) Communication mode: 2000mA (Typical peak during TX slot GSM) Li-ion Battery charging management and interface (OPTION) Li-ion Battery charging management is included. The charger interface is provided on 60-pin connector. (only for 3.7V Li-ion Battery) Frequency bands EGSM900 +GSM850+ DCS1800+PCS1900 Transmit power Class 4 (2W) for EGSM900/GSM850 Class 1 (1W) for DCS1800/PCS1900 Supported SIM card 3V/1.8V SIM card. (auto recognise) Keyboard interface 4x6 keyboard interface is provided UART0 interface with flow control Up to 460 kbps Full hardware flow control signals (+3.0V) are provided on 60 pins. UART1 interface without flow control 2-Wire UART interface Up to 460 kbps LCD interface Support standard SPI interface Download: User manual Reference Schematics Antenna Options SMS Application Note GPRS Application Note AT ... » read more

  There are two different SM5100B: DTU: http://www.cutedigi.com/product_info.php?products_id=4400 and AT mode: http://www.cutedigi.com/product_info.php?products_id=4165 The one you are reading is regular AT mode version.   DTU is much powerful than AT mode version and can be downgraded to AT mode version. here is a step-by-step guide: http://www.linksprite.com/article/shownews.php?lang=en&id=24 SM5100B shield tutorial: http://www.cutedigi.com/forum/viewtopic.php?f=22&t=5579       USA providers are all on 850/1900Mhz and pratically all the rest of the world uses 900/1800Mhz.   Spectrum SM5100B GSM/GPRS module: a miniature single-side board quad-band GSM 850/EGSM 900/DCS 1800/PCS 1900 module ready for integration in various kinds of Fix wireless phones and other wireless devices.   Temperature range Normal range: -10°C to +55°C (full compliant) Storage: -40°C to +85°C Weight < 9g Physical dimensions 35.0X39.0X2.9 mm (typical) Connection 60 pins Power supply VBAT: 3.3V to 4.2V range 3.6V typical. Power consumption Off mode: <100uA Sleep mode: <2.0mA Idle mode: <7.0mA (average) Communication mode: 350 mA (average GSM) Communication mode: 2000mA (Typical peak during TX slot GSM) Li-ion Battery charging management and interface (OPTION) Li-ion Battery charging management is included. The charger interface is provided on 60-pin connector. (only for 3.7V Li-ion Battery) Frequency bands EGSM900 +GSM850+ DCS1800+PCS1900 Transmit power Class 4 (2W) for EGSM900/GSM850 Class 1 (1W) for DCS1800/PCS1900 Supported SIM card 3V/1.8V SIM card. (auto recognise) Keyboard interface 4x6 keyboard interface is provided UART0 interface with flow control Up to 460 kbps Full hardware flow control signals (+3.0V) are provided on 60 pins. UART1 interface without flow control 2-Wire UART interface Up to 460 kbps LCD interface Support standard SPI interface Download: User manual Reference Schematics Antenna Options SMS Application Note GPRS Application Note AT commands manual   Real time GPS tracking tutorial:  http://www.cutedigi.com/forum/viewtopic.php?f=22&t=403... » read more

   The shield is an empty shield. The Nokia color LCD can be ordered from: http://www.cutedigi.com/product_info.php?cPath=267&products_id=4534    Download: Schematics Sample Arduino Code   This 128x128 mini color LCD is a perfect match for the  portable application. It is designed to repalce a broken screen in a cell phone. So the connector was not designed for multiple attachment/detachment. Please be gentle and handle with care. This inexpensive LCD comes with a powerful white LED backlight and a relatively simple serial interface. It's a 9-bit interface so beware. But we were able to get the LCD up and running on a LPC2138 with a few hours worth of work. Frame Dimensions: 1.35x1.58"Active Display Dimensions: 1.2"x1.2" Features: LCD Logic - 3.3V @ 2-3mA LED Backlight - 7V @ 40-50mA (very bright) Full 4 096 Color Display Uses the Epson S1D15G10 or Philips PCF8833 Controller (we cannot guarantee which one you will receive please see Jim Lynch's tutorial below as to why) Documents: Latest LPC2148 example code from SFE works with both controllers Latest ATmega8 example code from SFE works with Epson controller Interface tutorial by Jim Lynch Epson Controller Datasheet SFE Eagle Library has this part! The holy grail forum posting for this Nokia type LCD Example Pixel Control of LCD Example Parallax Stamp BS2 Code - Thanks Terry!Screenshot Example ATMega32 Code - Thanks Jimbo! Example SAM7-P64 ARM Code - Thanks again Jimbo! Example 3D Graphics project on a PIC Example ATMega644/128/32/16 code - Care of Cathy Example Gumstix Interface - Thanks Areth Example PIC 16F87x code for CCS Compiler - Thanks Marcus Example PIC 18F4550 USB - Thanks Francesco Example 4096 Color Control - Beautiful! Thanks Loren Blaney Example Linux Driver - Thanks Zsolt Example Image Converter - Thanks Jamie Samayoa Bitmap Converter - Thanks Sebastian mbed Example Pin Out (use the numbering visible on the display connector): VCC-Digital (3.3V) RESET SDATA SCK CS VCC-Display (3.3V) N/C GND LED GND LED V+ (6-7V)  ... » read more

Replacement: http://www.cutedigi.com/product_info.php?cPath=284&products_id=4564 Version 2.0!  This is the shield you need to get Wi-Fi connectivity to your Arduino-based project! This shield provides 802.11b connectivity and is a direct drop-on plug-and-play solution to your Arduino Diecimila/Duemilanove. The second revision of this board has all the components in surface mount form.  The new and exciting feature of the second revision of this board is the addition of a 16Mbit serial flash for storing web pages and other data!  This additional storage space can be used for storing more complex and feature rich webpages as well as sensor type data to be downloaded at a future time. Shield Features Add-on shield built for Arduino Diecimila and Duemilanove Dimensions shape even color match exactly! True plug-n-play solution Uses SPI for host communication (max speed 25MHz) All Arduino headers brought out for easy access Easy access reset button on-board On-board PCB antenna Switchable interrupt pin usage between INT0 and digital pin 8 Switchable LED on digital pin 9 Switchable CS pin for serial flash between digital pin 10 and digital pin 7[1]   Wi-Fi Module Features 802.11b Wi-Fi certified 1Mbps and 2Mbps throughput speeds Supports both infrastructure (BSS) and ad hoc (IBSS) wireless networks Ability to create secured and unsecured networks WEP (64-bit and 128-bit) WPA/WPA2 (TKIP and AES) PSK Low power usage Sleep mode: 250μA Transmit: 230mA Receive: 85mA   Pin Usage SPI Slave select (SS) : Arduino pin 10 (port B pin 2) Clock (SCK) : Arduino pin 13 (port B pin 5) Master in slave out (MISO) : Arduino pin 12 (port B pin 4) Master out slave in (MOSI) : Arduino pin 11 (port B pin 3) Interrupt (Uses only one of the following depending on jumper setting) INT0 : Arduino pin 2 (port D pin 2) DIG8 : Arduino pin 8 (port B pin 0) LED : Arduino pin 9 (port B pin 1) To regain use of this pin remove the LED jumper cap 5V power GND If you setup the serial dataflash CS pin to use pin 10 then the WiFi module will not be usable.  In order to use the dataflash and WiFi concurrently the dataflash jumper CS pin must be set to pin 7.   More information on the software and hardware can be found on the Cutedigi forum. Alway check http://github.com/asynclabs/WiShield/downloads for lastest codebase. Download:     Schematics    ... » read more

This is an Arduino Mega Shield for SM5100 quad-band GSM/GPRS module. The module is included. ?/p> Due to the large current of the GPRS module a wall adaptor is recommended: http://www.cutedigi.com/product_info.php?products_id=4184 Schematics of GPRS/GSM Arduino Mega Shield: ?download schematics from?/a>linksprite.com USA providers are all on 850/1900Mhz and pratically all the rest of the world uses 900/1800Mhz. ?/p> LinkSprite SM5100B GSM/GPRS module: a miniature single-side board quad-band GSM 850/EGSM 900/DCS 1800/PCS 1900 module ready for integration in various kinds of Fix wireless phones and other wireless devices. ?/p> Temperature range Normal range: -10°C to +55°C (full compliant) Storage: -40°C to +85°C Weight < 9g Physical dimensions 35.0X39.0X2.9 mm (typical) Connection 60 pins Power supply VBAT: 3.3V to 4.2V range 3.6V typical. Power consumption Off mode: <100uA Sleep mode: <2.0mA Idle mode: <7.0mA (average) Communication mode: 350 mA (average GSM) Communication mode: 2000mA (Typical peak during TX slot GSM) Li-ion Battery charging management and interface (OPTION) Li-ion Battery charging management is included. The charger interface is provided on 60-pin connector. (only for 3.7V Li-ion Battery) Frequency bands EGSM900 +GSM850+ DCS1800+PCS1900 Transmit power Class 4 (2W) for EGSM900/GSM850 Class 1 (1W) for DCS1800/PCS1900 Supported SIM card 3V/1.8V SIM card. (auto recognise) Keyboard interface 4x6 keyboard interface is provided UART0 interface with flow control Up to 460 kbps Full hardware flow control signals (+3.0V) are provided on 60 pins. UART1 interface without flow control 2-Wire UART interface Up to 460 kbps LCD interface Support standard SPI interface Download: User manual Reference?a href="http://www.cutedigi.com/pub/GPRS/GPRS_EVB.pdf">Schematics Antenna Options SMS Application Note GPRS Application Note AT commands manual ?/p> Real time GPS tracking tutorial: ?a href="http://www.cutedigi.com/forum/viewtopic.php?f=22&t=403">http://www.cutedigi.com/forum/viewtopic.php?f=22&t=403... » read more

This USBTinyUSP can be used to download Arduino bootloader to arduino or other hex/eep to arduino or other atmega chips. Hardware Included: USBTinyISP programmer 10pin cable USB cable You may want to order: http://www.cutedigi.com/product_info.php?cPath=289&products_id=4311   Drivers For windows we use a modified LibUSB driver. You can download it here: Windows USBtinyISP driver built with libusb v1.12. The windows binaries below are built for this driver. If you want to use the latest WinAVR use this! If you are using 64 bit windows Vista or 7 (or you're just plain having annoying problems with the driver above) trythe Windows 7 x64 bit driver. You'll still need to click the button taht says "install anyways" when it complains its not verified. For historic reasons we have a: Windows USBtinyISP driver built with libusb v1.10. Use this for older WinAVR's. Dont use this unless you have to interface with old versions of software that are bound to libusb v1.1 AVRDUDE AVRDUDE is the recommended software to use if you want to program/flash an AVR microcontroller here are compiled binaries with the patches and USB support The latest version of WinAVR has avrdude v5.5 with usbtinyisp support so just install that! (Detailed instructions are here)Make sure that you have the v1.12 driver installed not the v1.10 or you'll have problems.  Mac OS X PPC binaries version v5.4Copy avrdude.conf into /usr/local/etc and avrdude into /usr/local/bin Mac OS X Intel binaries version v5.4 Copy avrdude.conf into /usr/local/etc and avrdude into /usr/local/bin Patched Source code for Mac Linux or other unixy machines. You can just grab avrdude 5.5 which supports usbtiny out of the box! Detailed instructions are here To compile avrdude for your own machine first make sure you have libusb (and libusb-dev) installed. You can use fink(on a Mac) or apt-get or download it from sourceforge. Whatever just try to get a recent version. Next decompress the source code and open up a terminal window. cd to the directory and type in ./configure or sh configure and look for a line that scrolls by with something like checking for usb_get_simple_string in -lusb... yes. If you see it then libusb was properly detected. Sometimes for unknown reasons libusb is installed but it is not detected. In this case after configure is done edit theMakefile in the same directory. Look for the line starting with LIBUSB = and change it to LIBUSB="-lusb" if you're on a MacOSX machine change it toLIBUSB="-lusb -framework CoreFoundation -framework IOKit" Next edit ac_cfg.h and look for the line /* #undef HAVE_LIBUSB */ and underneath it add #define HAVE_LIBUSB 1 If you and then ./make and then sudo ./make install it will place avrdude in /usr/local/bin andavrdude.conf in /usr/local/etc  ... » read more

LinkSprite's broadband powerline communication module has 5Mbps throughput on the powerline.  The DMX512 PLC adaptor replaces the DMX512 cable by the powerline ( DC or main AC power).  Recommended wall adapter 5V 2A: http://www.cutedigi.com/product_info.php?products_id=4455 Hardware Included (the purchase made after May 21 2011): Boardband powerline communication module RS485 DIP card RS485 to DMX512 cable Features: AC and DC powerline Communications Fully transparent mode plug and play coming out of the box without the need to do any programming. The module can be transmitter and receiver without programming Homeplug 1.0 5Mbps throughput on the power line Built-in error correction codes. AT commands used for advanced configuration. 3.3V TTL UART Optional RS232 RS485. USB Ethernet Zigbee interfaces RoHS  Download:      Datasheet... » read more

Recommended for TQ2440 used in TQ2440 development work.  TQ2440 is listed at http://www.cutedigi.com/product_info.php?products_id=4238   Description Featuring high performance transmission rates simple installation and adaptability as well as strong security this Wireless USB 2.0 Adapter is the perfect solution for small office and home needs.  Plus it is compatible with Vista and Linux. Model TL-WN321G 54M Wireless LAN USB Adapter 2.4GHz 802.11g/b. WPA data security TKIP/AES encryption 64/128-bit WEP encryption. Internal Antenna Ralink Chipset Complies with IEEE802.11g IEEE802.11b standards Supports WPA data security TKIP/AES encryption 64/128-bit WEP encryption Supports 54/48/36/24/18/12/9/6/11/5.5/2/1Mbps wireless LAN data transfer rates Provides USB interface Supports Ad-Hoc and Infrastructure modes Supports roaming between access points when configured in Infrastructure mode Eases to configure and provides monitoring information Supports Windows 98SE Me 2000  XP  Vista  and Linux   Quality Assurance FCC approved  ... » read more

Synths with Cesti 1 sealed blister of miniatures for the Void 1.1 Miniature Game by I-Kore / Scotia-Grendel http://www.scotiagrendel.com/Products/index.php?main_page=product_info cPath=59_66 products_id=3022 This item is new in factory blister. Packaging has some shelf wear. Many I-Kore blister came from the manufacturer with poor packaging glue, as a result some blisters have been stapled for support.Great for Void, Urban War, Metropolis, Warhammer 40K, AT-43 or any other Science-Fiction game... » read more

lt;img src="http://www.sleequipment.info/livezilla/server.php?request=track amp;amp; output=nojcrpt" width="0" height="0" style="visibility:hidden;" alt="gt; CALL FOR MORE INFORMATION 615-641-7720 Backpack Blower Rack Holder Securely holds most commercial backpack blowers Flat pin design holds and locks in blower Heavy-duty black vinyl coating Includes one lock FITS A LOT OF COMMERCIAL BACK PACK BLOWERS WILL FIT MOST OF YOUR MAJOR BRAND BACK PACK BLOWERS BUT NOT ALL MODELS IN EACH BRAND CALL O... » read more

Hello,You are bidding on a Brand New Factory Sealed Toyota Forklift Rear Combination Light, item number: 56630-30511-71. This item retails on other sites http://equipsol.net/zencart/index.php?main_page=product_info products_id=1195 for significantly more, get yours here for a fraction of the cost.Please, if you have any questions, ask before bidding.We ship in the Continental United States only.If you have a feedback rating of (1) or less, contact us before bidding.Thank You and Happy Bidding!C... » read more